Metabo HPT RP3608DA Instructions De Sécurité Et Mode D'emploi page 20

English
(3) Tool box assembly (Fig. 27)
Tank
(4) Storing the appliance during breaks (Fig. 28)
Anytime you stop work or take a break from
cleaning, you can quickly store the unit by
hooking the zoom pipe to the pipe holder (the
hole at the top of the unit) so that it stands.
Zoom pipe
Pipe holder
20
Hook bolt
Tool box
(2WC only)
Fig. 27
Pipe hanger
Fig. 28
(5) When the appliance is stored (Fig. 29)
After removing the suction opening and hose,
hook the zoom pipe to the pipe holder so that it
stands.
Store the master nozzle, crevice nozzle and
battery in the tool box.
Zoom pipe
Hose id 1-1/2" × 4.9 ft
(id 38 mm × 1.5 m long)
Crevice nozzle
NOTE
○ When the attachments are stored in the
appliance, do not apply any excess force to the
attachments.
9. How to attach the paper fi lter (Optional)
WARNING
○ Be sure to turn off the appliance and remove
the battery.
○ When using a paper fi lter, use it in combination
with the standard cloth fi lter.
If the paper fi lter gets torn, dust may get inside
the motor, causing abnormal noise or fi re due
to overheating.
CAUTION
When using a paper fi lter, avoid sucking in
liquids such as water or wet dust, as this may
lead to tearing of the fi lter.
Master nozzle
Battery
Tool box (2WC only)
Fig. 29