Publicité
Les langues disponibles
Les langues disponibles
(2)
Attaching fi lters
<Attaching the cloth fi lter>
Insert the cloth fi lter so that the seam is on the
other side of the hose inlet. (Fig. 17)
Filter seam
Suction opening
(Inside of the tank)
<Attaching the water fi lter>
When installing the water fi lter, make sure the
cloth patch of the water fi lter is fi tted to the
suction opening of the hose. (Fig. 18)
Suction opening
(Inside of the tank)
NOTE
When using the water fi lter, make sure the cloth
fi lter is removed.
(3) Check that the fi lter packing is put on the mouth
of the tank. (Fig. 19)
(4)
Check that the fi lter cage is on the bottom of the
fi lter. (Fig. 19)
Filter packing
Mouth of the tank
Filter
Cloth fi lter
Fig. 17
Cloth patch
Water fi lter
Fig. 18
Filter cage
Fig. 19
4.
Attach the zoom pipe, master nozzles, etc.
When it is used as a cleaner (Fig. 20)
(1)
Connect in order of Hose id 1-1/2" × 4.9 ft
(id 38 mm × 1.5 m long), zoom pipe and Master
nozzle. Connection is done by pressing in the
direction of the arrow. The suction mouth for
crevices can also be attached depending on
the application.
Zoom pipe
Master nozzle
(2)
Next, loosen the screw ring on the zoom pipe
and adjust to the length appropriate to the task.
After the adjustment, make sure the screw ring
is secure by securely tightening it. (Fig. 21)
Screw ring
Zoom pipe
English
Hose id 1-1/2" ×
4.9 ft (id 38 mm ×
1.5 m long)
Fig. 20
Release
Fix
Fig. 21
17
Publicité
