Stopping And Disconnecting The Kettle; Cleaning And Maintenance; Cleaning - Brandt BO1700EX Manuel D'instruction

Water temperature and steep time of hot drinks:
(Steep times are indicative. It is recommended to adapt to your personal taste.)
c) Stopping and disconnecting the kettle
 To stop the appliance, press the ON/OFF button for 3 seconds.
 When the appliance is in standby, the program light stay on the pre-set position, the
heating element did not work and the display indicates actual water temperature.

To completely shut off the appliance, lift it from the base.
If a short circuit occurs, the system stops automatically
Always grip the kettle by the handle

4)CLEANING AND MAINTENANCE

a) Cleaning
Before cleaning, unplug the connection base and allow the kettle to cool down.
 Clean the outside of the kettle and the connection base with a slightly damp cloth,
ensuring that the electrical components remain dry.
 Do not use abrasive or degreasing agents.
 To prevent particles of lime from becoming detached in the liquid, the kettle
incorporates a lime filter. To clean it, remove it by pulling upwards. Clean the filter by
rinsing it under the tap and use a soft brush to remove any lime which has become.
 Clean the inside of the kettle with soapy water.
22