Stopping And Disconnecting The Kettle; Cleaning And Maintenance; Cleaning - Brandt BO1200EN Manuel D'instruction

After reaching the pre-set temperature the kettle will shut-off, the program light will flash on
display until the sensor did not work. If you pressed the ON/OFF button, the function light
will stay at previously set position until you change it. When selecting keeping warm function
"Chaud" the LED display indicates –by default- 70°C.
It is possible to adjust the temperature 5°C by 5°C pressing "+" or "-" button. After reached
the pre-set temperature, the system will shut-off and keep warm at the pre-set temperature
(during about 20 minutes).
Water temperature and steep time of hot drinks:
(Steep times are indicative. It is recommended to adapt to your personal taste.)
d) Stopping and disconnecting the kettle
 To stop the appliance, press on the ON/OFF button for 3 seconds.
 When the appliance is standby, the program light stays on the pre-set position, the
heating elements do not work and the display indicates current water temperature.
 To completely shut off the appliance, lift it from the base.

4) CLEANING AND MAINTENANCE

a) Cleaning
Before cleaning, unplug the connection base and allow the kettle to cool down.
 Clean the outside of the kettle and the connection base with a slightly damp cloth,
ensuring that the electrical components remain dry.
22