Changing The Light Bulbs - Pelgrim RSK860 Mode D'emploi

MAINTENANCE
Carbon filter
Light bulbs
Position the activated carbon filter
• Remove the grease filters.
• Position the activated carbon filter behind the grease filter and fix
with the two fasteners.

Changing the light bulbs

Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are cooled down.
1. Using a flat head screwdriver or equivalent tool, carefully pry loose
the light cover.
2. Remove the damaged light and replace with a new 12 Volt, 20 Watt
(Maximum) halogen light made for a G-4 base SUITABLE FOR USE
IN OPEN LUMINAIRES.
3. Follow package directions and do not touch new light with bare
hands.
4. Reinstall the light cover (it will snap shut).
If the lights do not work, make sure that the lamps are fitted properly
into their housings before you call for technical assistance.
GB 13