Bosch PLR 25 Notice Originale page 21

Digital laser measure
Storage temperature
Relative air humidity max.
Max. altitude
Pollution degree according to IEC 61010-1
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– 10 m distance
– 20 m distance
Automatic switch-off after approx.
– Laser
– Measuring tool (without measurement)
Weight according to EPTA-Procedure 01:2014
Dimensions
Batteries
Battery life approx.
– Individual measurements
– Continuous measurement
A) For measurements from the rear edge of the measuring tool. The working range increases de-
pending on how well the laser light is reflected from the surface of the target (scattered, not re-
flective) and the brighter the laser point is to the ambient light intensity (interior spaces, twi-
light). For distances of less than 20 m, a retro-reflective target plate should not be used, as it
can lead to measurement errors.
B) For measurements from the rear edge of the measuring tool, 100% reflectivity of the target (e.g.
a white wall), weak backlighting and 25 °C operating temperature. In addition, a deviation influ-
ence of ±0.05 mm/m needs to be taken into account.
C) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
D) At an operating temperature of 25 °C
The serial number (11) on the type plate is used to clearly identify your measuring tool.
Bosch Power Tools
English | 21
PLR 25
–20 °C to +70 °C
90%
2000 m
C)
2
2
635 nm, < 1 mW
9 mm
18 mm
20 s
5 min
0.08 kg
100 x 42 x 22 mm
2 x 1.5 V LR03 (AAA)
D)
10,000
D)
2.5 h
1 609 92A 4NV | (26.10.2018)