Troubleshooting - Silk-n Jewel Mode D'emploi

8. Troubleshooting

Do not attempt to open or repair your Silk'n device. You may
expose yourself to dangerous electrical components or pulsed
light energy and cause serious harm to yourself. It will also void
your warranty. For unresolved problems or queries, please
contact customer service.
Problem
My device does not start. Make sure the adapter is properly
There is no light pulse
when the device touches
my skin.
The skin colour sensor
light (#5) and the ready
(#4)
light blink.
One or more lights blink
continuously.
The device has stopped
working and is in standby
mode.
Checks
connected to the device and that it is
plugged into an electrical outlet on
the wall.
Check that the device is connected
and the ready light
sure that the treatment surface
evenly and firmly pressed to the skin.
It is also possible that your skin colour
is too dark.
The skin colour is too dark.
The device has malfunctioned.
Press the control button
start the device.
21
(#4)
is on. Make
(#6)
(#3)
again to
EN
is