Parameters In The Main Menu Without Bid - ROBBE Power Peak C8 EQ-BID Notice D'utilisation

7.

PARAMETERS IN THE MAIN MENU WITHOUT BID

Select the menu by pressing the "VIEW" button, then use the "+" or "-" buttons or the Select
Wheel to display the following parameters.
INPUT VOLTAGE
DISPLAY OF THE LAST BATTERY CHARGE PROCESSES (M1 ... M5)
Select Wheel to view the desired memory. Pressing the "ENTER" button again cancels the
selection.
DISPLAY OF THE LAST BATTERY DISCHARGE PROCESSES (M1 ... M5)
the Select Wheel to view the desired memory. Pressing the "ENTER" button again cancels
the selection.
DISPLAY OF MAXIMUM BATTERY VOLTAGE
DISPLAY OF AVERAGE BATTERY VOLTAGE
DISPLAY OF CHARGED-IN OR DISCHARGED ENERGY
EQUALIZER DATA
If more than six Lithium cells are connected to the charger, the screen shows two alterna-
ting displays.
Note: the individual cell voltages are only displayed if a voltage sensor lead is connected.
Operating Instructions
Power Peak ® C8 EQ-BID
Display of input voltage.
This function enables you to reconstruct the last five
battery charge processes; only the charged-in capa-
city is displayed. Press the "ENTER" button to select
the parameter, then use the "+" or "-" buttons or the
This function enables you to reconstruct the last five
battery discharge processes; only the discharged
capacity is displayed. Press the "ENTER" button to
select the parameter, then use the "+" or "-" buttons or
Maximum battery voltage during a charge or discharge
process.
Display of average battery voltage during a charge or
discharge process.
Display of the charged-in or discharged energy; the
value is shown in Wh (Watt/hour).
10
No.
8553