Using The Tuner; Listening To The Radio; Improving Fm Stereo Sound; Saving Station Presets - Pioneer SX-315 Mode D'emploi

Multi-channel
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the tuner

Chapter 06:
Using the tuner

Listening to the radio

The following steps show you how to tune in to FM and
AM radio broadcasts using the automatic (search) and
manual (step) tuning functions.
Once you are tuned to a station you can memorize the
frequency for recall later—see Saving station presets
below for more on how to do this.
INPUT SELECTOR
FM/AM
TUNING
+
RECEIVER
1
Press the FM/AM INPUT SELECTOR button to
select the tuner.
The front panel display shows the band (FM or AM) and
the frequency. If you want to change the band, press FM/
AM again.
2
Tune to a station.
There are three ways to do this:
• Manual (step) tuning
To change the frequency one step at a time, press
TUNING +/–.
MPX
• Automatic tuning
To search for stations in the currently selected band,
press and hold TUNING +/– for about a second. The
receiver will start searching for the next station,
stopping when it has found one. Repeat to search for
other stations.
• High speed tuning
Press and hold TUNING +/– for high speed tuning.
Release the button at the frequency you want.

Improving FM stereo sound

If the tuning (
) or FM stereo (
when tuning to a stereo FM station because the signal is
weak, press the MPX button to switch the receiver into
mono reception mode. This should improve the sound
quality and allow you to enjoy the broadcast.

Saving station presets

If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall. This saves the effort of manually tuning in
each time.
You can memorize up to 30 stations, stored in three
banks, or classes, (A, B and C) of 10 stations each. When
saving an FM frequency, the MPX setting (see above) is
also stored.
INPUT SELECTOR
FM/AM
TUNING
+
1
Tune to a station you want to memorize.
See Listening to the radio above for more on this.
2
Press TUNER EDIT.
The display shows a blinking memory class.
) indicators don't light
TUNER
EDIT
CLASS
STATION
+
ENTER
06
23
En

Publicité

Chapitres

Table des Matières
loading

Table des Matières