Publicité
Les langues disponibles
Les langues disponibles
HAND MANOEUVERING (Optional)
1.
Ensure that the booms are fully lowered, all outriggers are fully raised
and the machine is in a menoeverable condition.
2.
Engage the the friction drive cylinders against the trailer tyres by pulling
actuating levers forward and down until they lock overcentre.
3.
Ensure the power selector switch is set to Base.
4.
Disengage the handbrake, and ensure that the Jockey wheel directional
locking pin is removed
5.
Traction is controlled via the 2 hydraulic levers on the R/H side of the
chassis.
6.
The left lever controls the left motor and the right lever the right.
Operating only the left lever forward will turn the machine right and the
right lever will turn the machine left, operate both levers together for
parallel drive.
7.
When the machine is in position replace handbrake.
Ensure friction drive cylinders are disengaged prior to platform
!
operation or towing.
12
508159-000
TL49K
Publicité
Chapitres
