Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
Wash / disinfect the parts manually and rinse thoroughly in clean water to
remove all detergent residues.
6.
Shake out remaining water from the mask and dry the parts thoroughly.
7.
Lubricate the pin of the exhalation valve assembly with silicone lubricant.
8.
Assemble the exhalation valve assembly.
Make sure to assemble the pin in the hole.
9.
Assemble the exhalation valve holder.
Respire ESA and PE
17
Publicité
Table des Matières
