Grease Filters; Carbon Filter - ETNA AB790RVS Mode D'emploi

MAINTENANCE

Grease filters

Carbon filter

Removing the grease filters
1. Remove the filters one by one by pulling on their release handles.
Replacing the carbon filter
Use a carbon filter when the cooker hood is not connected to
an exhaust duct.
1. Remove the grease filters
2. Fit the carbon filters in the cooker hood
3. Fit the grease filters.
Important:
• The saturation of the filter depends on the intensity of use, the
manner of cooking and the regularity with which the grease filters
are cleaned.
• The carbon filter must be replaced at least once every four months.
• Carbon filters cannot be washed for reuse. Saturated carbon is not
environmentally friendly, so replace the filter in time.
EN 9