Publicité
Les langues disponibles
Les langues disponibles
LOCATION
30cm/
1 ft
WINDOW KIT
INSTALLATION
The window kit has been designed to fit most standard "vertical" and "horizontal" window applications;
however, it may be necessary to improvise or modify some aspects of the installation procedures for unique
window types.
Horizontal Windows: Minimum & Maximum
Horizontal
window
Window Slider Kit:
Min: 67.5cm (2.22ft)
Max: 123cm (4.04ft)
NOTE: If the window opening is less than the stated minimum length of the window slider kit, cut the
exhaust slider (the one with the oval shaped hole) shorter in order to fit it to the window. If you are going to
cut, do not compromise the integrity (shape) of the factory cut hole in the slider, as this would make proper
ventilation impossible.
Horizontal / Vertical Window Installation
1) Select a suitable location, making sure you have access to an electrical outlet.
2) Install the intake / exhaust hoses to the rear of the unit (Accessories #1) as shown in Fig. A, page 4 .
3) Install the window slider kit (Accessories #5) as shown in Fig. B or Fig. C depending on window type.
4) Attach the two intake / exhaust hose adapters (Accessories #3) to the end of each hose.
5) Attach the intake / exhaust adapters to the holes in the window kit, making sure the window kit is securely
in place.
NOTE: For vertical window installation, ensure that the exhaust hose adapter is above the intake hose adapter
(to prevent the unit from taking in hot exhaust air).
6) Plug power cord into a 115 V / 60 Hz grounded electrical outlet.
INSTALLATION INSTRUCTIONS
• The air conditioner should be placed on a firm foundation to
minimize noise and vibration. For safe and secure positioning,
place the unit on a smooth, level floor that is strong enough to
support the unit.
• The unit has castors to aid placement, but if should only be rolled
on smooth, flat surfaces. Use caution when rolling on carpet
surfaces. Do not attempt to roll the unit over any objects.
• Never place any obstacles around the air inlet or outlet of the
30cm/
unit.
1 ft
• Give at least 30 cm (1 ft) of free space between the wall and the
unit to allow for efficient air-conditioning.
Fig. B
Vertical Windows: Minimum & Maximum
Vertical
window
Window Slider Kit:
Min: 67.5cm (2.22ft)
Max: 123cm (4.04ft)
5
Fig. C
Publicité
