Publicité
Les langues disponibles
Les langues disponibles
PART IDENTIFICATION:
1) Display Window: Shows the set
temperature (in °C or °F) and the
Auto-timer settings.
2) Temp. Increase: Press to increase
the set temperature by one degree.
3) Temp. Decrease: Press to decrease
the set temperature by one degree.
4) Mode selection button: Pressing
rotates through the available
operations.
5) Fan Speed Selection button:
Pressing alternates between available
fan speeds (some operations only).
6) Reset: When pressed in, all settings
are cancelled and the control returns
to its default (factory) settings.
REMOTE DISPLAY WINDOW:
1) Digital Display Area: Shows the set temperature (in °C or °F). When
the Auto-timer is being programmed, the display also shows the Auto-
timer settings.
2) Transmission Indicator: This indicator flashes when the remote
signals the unit.
3) Mode Display: Indicates which operation is currently selected.
4) Lock Display: This indicator appears when the remote control has
been locked.
5) Fan Speed Selection button: Pressing alternates between available fan speeds (some operations only).
6) Reset: When pressed in, all settings are cancelled and the control returns to its default (factory) settings.
NOTE: To disconnect power completely, the power cord must be unplugged after deactivating the machine.
REMOTE OPERATING INSTRUCTIONS: Operations work the same way with the remote control buttons
as they do when using the unit's control panel (refer to Operating Instructions for more details).
WARNING: Keep the remote control away from all liquids.
Important Notes on the Remote Control:
• Be sure there are no barriers between the remote control and the receiver (signal interceptor) on the unit's
control panel.
• Protect the remote control from high temperatures, and keep it away from radiation exposure.
• Keep the control panel receiver out of direct sunlight.
• Keep the remote control away from Electro-Magnetic-Interference (EMI) generated by other household
appliances.
REMOTE CONTROL
7) Lock: When pressed in, all current
settings become locked in (cannot be
adjusted) until the lock button is
pressed again.
8) Timer Off: Press the Timer Off
button to initiate the Auto-Off
program. Also used to adjust the
Auto-Off timer settings.
9) Timer On: Press the Timer On
button to initiate the Auto-On
program. Also used to adjust the
Auto-On and Auto-Off timer settings.
10) Power On Off button: Pressing
activates or deactivates operation of
the machine.
NOTE: To disconnect power
completely, the power cord must be
removed after deactivating the machine.
9
1
3
4
5
6
3
2
1
7
4
5
2
10
9
8
7
6
Publicité
