How to...
3. Vacuum Seal with FoodSaver
1. Prepare container according to FoodSaver
Accessory Guidelines (see manual that comes with
your Accessory Kit).
2. Insert one end of Accessory Hose into Accessory
Port on appliance. Insert other end into port on
accessory. Twist tab on Accessory Hose while
inserting to ensure a tight fit.
3. Close lid, rotate Latch to OPERATE position, press
Vacuum & Seal Button.
4. When motor and Indicator Light turn off, vacuum
process is complete. Note that the appliance will still
go through sealing cycle even when vacuuming an
accessory. You will hear Motor shut off and then the
sealing cycle will begin.
5. Gently twist and remove Accessory Hose from
accessory and appliance.
6. To test vacuum, simply tug on accessory lid.
It should not move.
NOTE: For important tips on using accessories with
different foods, please refer to the FoodSaver
Storage Guide on pages 18-19.
4. Use Handheld Sealer with
Vacuum Zipper Bags
Handheld sealer can be used with Vacuum Zipper Bags.
1. Fill zipper bag, lay flat with grey circle facing upwards.
Squeeze air out, zip 3/4 of the way closed and squeeze any
remaining air out before zipping completely.
2. Press Handheld Sealer over gray circle on bag and press
Vacuum & Seal button.
8
FM2100 Series_14EFM1.indd 11-12
®
®
®
www.FoodSaver.ca
Accessories
Connect Accessory Hose to both accessory
port on appliance & port on accessory
Close and turn Easy Lock Latch to the
OPERATE position
Press Vacuum & Seal Button