FoodSaver FM2100 Notice D'emploi page 7

How to...
1. Make a Bag from a FoodSaver
1. Open appliance door and place roll into roll
holder (material flap down). Slide Bag Cutter
to cut bag material to size, plus 3 inches.
Be sure to cut straight.
2. Move Easy Lock Latch to the open position. Open
appliance lid. Insert one end of bag material across
Sealing Strip.
3. Close lid and turn Easy Lock Latch to
OPERATE position.
4. Press Seal button.
5. When Seal Indicator Light turns off, sealing is
complete. Turn latch to OPEN position, lift lid and
remove bag.
Now you are ready to vacuum seal with your
new bag (see next page).
6
FM2100 Series_14EFM1.indd 9-10
®
www.FoodSaver.ca
Roll
Place Bag on Sealing Strip
Close and turn Easy Lock Latch to OPERATE position
Press Seal Button