Oven Cooking; Manual Clean Oven Controls; Clock - Maytag Performa MGR5751ADB Mode D'emploi

Oven Cooking

Manual Clean Oven Control
(select models)
NOTE: The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil
indicators light when function is pressed.
A Bake Use for baking and roasting.
B Broil Use for broiling and top browning.
C Timer Sets Timer.
D

Clock

Use to set time-of-day clock.
E CANCEL Cancels all operations except Timer
and Clock.
F More+ or Enters or changes time, oven
Less- temperature. Sets HI or LO broil.
Using the Touchpads
• Press the desired pad.
• Press the More+ or Less- pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the More+ or Less- pad.
• A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the More+ or Less-
pad, the time or temperature will automatically be entered.
If more than 30 seconds elapse between touching a
function pad and the More+ or Less- pad, the function will
be canceled and the display will return to the previous
display.
Setting the Clock
1. Press the Clock pad.
• The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
A
A B C D E F
2. Set the correct time of day using the More+ or Less- pads.
If the More+ or Less- pad is not pressed within 30 sec-
onds, the program will cancel. Press the Clock pad and
begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours
and 59 minutes (99:59). Time will be displayed in minutes and
not in seconds. THE TIMER DOES NOT CONTROL THE
OVEN.
1. Press the Timer pad.
• 0:00 will light and the colon (:) will flash in the display.
2. Press the More+ or Less- pad until the desired time is
displayed.
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing operation is in
progress. (The colon will not flash if the time of day or
oven temperature is displayed.)
• Two short beeps signal the end of the operation. "0:00"
will appear in the display.
• If desired, press the Clock pad and the time of day will
briefly reappear in the display during a timing operation.
• If desired, press the Bake or Broil pads and the current
temperature setting will briefly reappear in the display
during a timing operation.
To cancel the timer operation:
Press and hold the Timer pad for several seconds.
7
F