Switch Trigger; Main Power Button - Makita DUR364L Manuel D'instruction

Indicator lamps
Lighted Off
015658
NOTE:
Depending on the conditions of use and the
•
ambient temperature, the indication may differ
slightly from the actual capacity.
Remaining battery capacity indication
(Country specific)
2
015387
Press the check button to make the battery indicators
show the remaining battery capacities. The battery
indicators correspond to each battery.
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
1. Battery indicator
2. CHECK button
1
Remaining battery capacity indication
Battery indicator status
Blinking
On Off
015452
Power switch action
WARNING:
Before inserting the battery cartridge into the tool,
•
always check to see that the switch trigger
actuates properly and returns to the "OFF"
position when released. Operating a tool with a
switch that does not actuate properly can lead to loss
of control and serious personal injury.
1
015382
Press and hold the main power button for some
seconds to turn on the tool.
To turn off the tool, press and hold the main power button again.
2
015388
To prevent the switch trigger from being accidentally
pulled, a lock-off lever is provided.
To start the tool, grasp the rear handle (the lock-off lever
is released by the grasp) and then pull the switch trigger.
To stop the tool, release the switch trigger.
8
Remaining battery capacity
50% - 100%
20% - 50%
0% - 20%
Charge the battery
1. Main power
button
1. Lock-off lever

2. Switch trigger

1