Loading The Media - Toshiba TEC B-670 Série Mode D'emploi

8. LOADING THE MEDIA

8. LOADING THE MEDIA
1 . Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing,
etc., be drawn into the moving parts, push the switch in the "OFF" position to
stop movement.
2. To avoid injury, be careful not to catch or jam your fingers while opening
or closing the cover.
1. Install the holder stand on the rear of the printer.
2. Loosen the screw
Media Guides
Release Lock
CAUTION:
DO NOT MOVE the Media Guides using the screw
3. Lock the Media Holder securely with the Lock Lever.
4. Pass the Holder Shaft through the Media, then set one of the Media Holders and lock it securely with
the Lock Lever.
Media Holder
Holder Shaft
Lock Lever
WARNING!
and slide the media guides outside.
Screw
Media
.
Media Holder
Lock Lever
E8-1
ENGLISH VERSION EO1-33016
8. LOADING THE MEDIA
Holder Stand
Fig. 8-1
Holder Shaft
Fig. 8-2