Device Description; Delivery, Unpacking And Accessories - SIKA P 700 T Notice D'utilisation

Device description

1 Device description
The P 700 T hand lever test pump by SIKA is used for generating pressure for inspection, ad-
justment or calibration of pressure sensors, pressure gauges, pressure switches and pres-
sure measuring devices of all kinds.
The P 700 T has a compact design and can be easily used di-
rectly onsite in workshops, test and measurement rooms or
laboratories.
Important fields of application can be found e.g. in assembly
and commissioning, in manufacturing and production well as
in service, quality assurance and test equipment monitoring.
For a pressure test, you need additionally to the hand lever

test pump a test sample
The reference is directly screwed to the P 700 T.
The test sample is connected by means of a pressure hose
The P 700 T and the pressure hose have self-sealing
®
MINIMESS quick couplings.
Type plate and label:
You find the type plate on the top of the housing of the res-
ervoir.
It contains the most important data and notes (Example
 Fig.).

1.1 Delivery, unpacking and accessories

All units have been carefully checked for their operational reliability before shipment.
 Immediately after receipt, please check the outer packaging for damages or any signs of
improper handling.
 Report any possible damages to the forwarder and your responsible sales representa-
tive. In such a case, state a description of the defect, the type and the serial number of
the device.
Report any in-transit damage immediately. Damage reported at a later date shall not be
recognized.
Unpacking:
 Carefully unpack the unit to prevent any damage.
 Check the completeness of the delivery based on the delivery note.
- 24 -
 .
and a reference

.
© SIKA • Ba_P700T • 02/2017
P 700 T