Device Description - SIKA P40.2 Notice D'utilisation

Device description

1 Device description
The hand pump creates positive pressure or a vac-
uum for the inspection, adjustment or calibration of
pressure devices of all kinds.
The hand pump can be used for test items directly on
location, thanks to its light weight and compact de-
sign.
When the hand pump is used, it needs to be con-
nected to a reference gauge and to the test item.
Versions:
The hand pump is available for two pressure ranges:
Type
P40.2
P60
Scope of delivery and accessories:
Check the delivered items.
 Hand pump.
 Pressure hose:
The pressure hose is supplied from the factory
already screwed onto the hand pump.
The pressure hose should remain attached to the
hand pump during operation, storage and trans-
portation. Removing the pressure hose should be
avoided.
 Operation manual.
 Accessories (optional).
Transportation cases, adapter sets, seal sets and reference gauges can be ordered as acces-
sories.
Transportation case (Item No.: EPPM040KOFFE01):

The transportation case provides optimal protec-
tion for the hand pump and other accessories
with its tight-fitting rigid foam inlay.
A document compartment is located in the lid
behind the burl foam inlay.
Adapter set (Item No.: EPPM040ADAPT01):

The adapter set comprises 11 adapters for all
common pressure connections with or without
pins.
 Seal set (item No.: EPPM040DICHT01):
The seal set contains flat seals made of plastic
and O-rings for all common pressure connections.
- 20 -
Pressure range
-0,95 ... 40 bar
-0,95 ... 60 bar
P40.2 / P60
© SIKA • Ba_P40.2 • 01/2014