Additional Tips - DENTAURUM ConTec Go Mode D'emploi

8. Elimination of bracket adhesive residues
8.1. Remove the bracket adhesive residues carefully after debonding the brackets using a scaler, a
special carbide bur or our adhesive residue removers (REF 123-700-00, 123-701-00,
123-702-00, 123-703-00) at low speed, in a dry area and with continuous air stream.
8.2. Polish the tooth surface with a rubber polisher and pumice powder.
8.3. Fluoridate the tooth surface.
9. Side effects
Adhesive paste and activator can trigger allergies. If there is a known allergy to acrylates,
methacrylates or dibenzoyl peroxide, don't use the material.
10. Safety instructions
 Keep out of reach of children!
 For dental use only!
 Cracks and lesions in the tooth surface may lead to enamel fractures when debonding the
brackets. Do not bond brackets to damaged teeth.
 Avoid prolonged contact of the adhesive paste or the activator with soft tissue and skin. Wear
protective gloves.
11. Composition
Adhesive paste:
Silicon dioxide, dental glass, Bis-GMA-based resin matrix, additives, catalysts
Activator:
Bis-GMA-based resin matrix, silicon dioxide, additives, catalysts
Etching gel:
Phosphoric acid, water, silicon dioxide, additives
12. Storage and shelf life
Do not use after the expiry date. Store at 5 – 25 °C / 41 – 77 °F
Remove package from refrigerator at least 30 minutes before use to guarantee that material
reaches room temperature (15 – 25 °C / 41 – 77 °F).
13.

Additional tips

Should the user and / or the patient gain knowledge of serious incidents arising from the use of
the product, it is important that the manufacturer and the competent authority in the country in
which the user and / or the patient is resident are informed.
EN
9