AMIX AFF-3 Série Manuel Utilisateur page 58

REAR PANEL
5 ) RJ45 opto mos relay output connector corresponding to alarm level exceeding.
GPO1
GPO2
Internal OPTO MOS wiring
CMD 2
CMD 1
Caution: Do not connect any computer to this jack, excess risk of damage to your network
adapter.
The GPO1 and GPO2 relay outputs can also be used to trigger an audio recorder with time stamp
(equipment not supplied).
This allows if the setpoint is exceeded, to identify the sound level involved, music or noise of the public
(applause, shouting ...)
6 ) RJ45 connector to ethernet (LAN)
7 ) POE option
If the option is checked, the AFFXX-3 internally contains the POE (Power over Ethernet) power
interface. This function is used to power the equipment directly via the network cable, without
the need for an external 12 Volt power supply.
Switch POE
or
Switch
Mains
AMIX
1
+
SENSOR
-
V+
Leds GPO1 and GPO2 display GPO1 and GPO2 state.
OPTO MOS 2
OPTO MOS 1
8
1
2
3
V+
4
5
6
7
8
POE injector
Power supply
Note :
Each OPTO can be considered as a relay and offers
all the advantages (alternative signals, no
polarization). Current limit is fixed at 200mA.
or
19
P .supply
Mains
Next
AFFseries-3