The control light around the chosen position will blink, and light up continuously when the chosen temperature has
been reached.
ATTENTION: the baking plate will now get hot. Only touch the handles and the control buttons.
ATTENTION: at first use, the appliance may release some smell or some smoke. This is normal.
Now put the food on the plate.
ATTENTION: do not use frozen food! Always defrost it first and dry it.
ATTENTION: regularly check the content of the grease collecting tray to make sure it doesn't run over.
After use, pull out the plug from the socket and switch off the appliance
Let the appliance cool off entirely before moving it, removing the baking plate or cleaning it.
Clean the appliance as explained in point 6: Cleaning and maintenance.
Store the appliance in a dry, frost-free place.
6.
CLEANING AND MAINTENANCE
Pull out the plug from the socket.
Let the appliance cool off entirely before removing the baking plate and the grease collecting tray.
The baking plate and grease collecting tray are to be cleaned by hand with hot water and detergent. Because of the
electric contact pins at the backside of the baking plate, dry very thoroughly before placing it back.
ATTENTION: NEVER use abrasive products or oven cleaner to clean the appliance.
TIP: First remove the baking residues with some paper towels.
a) Cleaning of the frame and power cord:
-
Only use a soft, damp cloth
The base and the cord may NEVER be immersed in water or in any other liquid.
-
USEFUL TIPS IN CASE OF MALFUNCTIONS
7.
Do not use the appliance when it is malfunctioning. First go through the following:
The appliance doesn't warm or the control lamp doesn't light up:
Check if your appliance is connected to the right mains voltage, whether there is mains voltage, and if the appliance
was plugged in correctly.
If there is still a malfunctioning, please return the appliance to your sales point.
If the power cord is damaged, don't use your appliance and return it to your sales point immediately.
THE APPLIANCE HAS BEEN DESIGNED FOR DOMESTIC USE. THE GUARANTEE CONDITIONS EXPIRE UPON
DEFECTS AND/OR DAMAGES FOLLOWING TO THE NON OBSERVANCE OF THE USER MANUAL ARE NOT
8.
WARRANTY CONDITIONS
Your warranty starts on the day of purchase. The warranty lasts 2 years.
Determination of warranty:
The warranty covers every repair and/or replacement free of charge of the parts recognized defective by our
Department of Service after Sale if the damage is due to faulty design, material or construction. The warranty does
not cover damage or normal wear of the baking plate.
The warranty is only valid for the first/original user.
The transport costs are at the expenses of the purchaser.
The warranty is only granted after presentation of your purchase invoice.
PROFESSIONAL USE
COVERED BY THE GUARANTEE.
16