Seca 720 Mode D'emploi Et Garantie page 18

– Use arrow keys 2 L and 3 M to select
your gender and your build:
MALE NORMAL: male, normal build,
(exercising a maximum of twice a week
for 30 minutes),
FEMALE NORMAL: female, normal
build, (exercising a maximum of twice a
week for 30 minutes),
MALE ATHLETIC: male and athletic,
FEMALE ATHLETIC:
Measuring with automatic person recognition
The seca 720/818 can use the weight to recognise whether the person standing on the
scale matches one of the stored sets of data in the four people memories. This means
you do not always have to start the scale using the key assigned to you. To do this, the
measured weight is compared with the stored weights and, if it is within a certain toler-
ance, it is then linked to the appropriate personal memory. The current weight is then
stored again and used as the basis for subsequent measurements. As a result, the scale
is always updated if you lose weight continuously - while on a diet, for example.
Note:
When you get on the scale the first time after storing your personal data, you must first
switch on the scale using the key assigned to your data. The scale can then assign your
weight to your personal data.
– Step gently onto the scale. The vibra-
tion switch starts the scale.
and
se(a 0. 0 0
the display. The scale is then automati-
cally set to zero and ready to use.
– Step onto the scale barefoot and stand
still (see Fig. 6)
The scale measures your weight and
subsequently starts measuring the elec-
trical resistance of your body tissue.
While the measurement is being taken,
the symbol moves across the display.
o
– After measurement, the scale com-
pares the measured weight with the
Note:
If your determined weight is close to the stored weight of another person, it could be the
case that your measured values are assigned to a different personal memory. Check
whether the correct personal memory symbol is being displayed during the measurement.
If necessary, switch on the scale using the 1 GUEST, 2 L, 3 M or 4 SET key assigned
to your personal memory before measuring if automatic person recognition does not
work.
Measurement likewise functions if you perform it using the Step Off function (see "Simple
Weighing" on page 15).
Model 720/818
female
appear consecutively in
athletic.
– Confirm your selection by briefly press-
ing the 4 SET key.
The 1 GUEST for entering age appears.
– You can increase or decrease the value
using arrow keys 2 L and 3 M.
– Once the correct value has been set,
briefly press the 4 SET key.
This concludes data entry for the per-
and
sonal data for one person.
stored weights. If it cannot clearly as-
sign it, all personal memory symbols
flash on the display.
– If the scale cannot clearly assign your
weight, now press the key (1 GUEST,
2 L, 3 M or 4 SET) which is assigned
to your personal data.
– Following successful measurement,
the values for BMI, body fat and body
water are displayed three times con-
secutively. The scale then switches off.
– Compare your values with the catego-
ries on pages 18 and 19.
GB
17