Environmental Protection; Declaration Of Conformity - Bosch GHO 40-82 C PROFESSIONAL Instructions D'emploi

WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.

Environmental Protection

Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Service and
Customer Assistance
Exploded views and information on spare
parts can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service
............................
Advice line
....................
Fax
.............................................
17 • 2 609 932 232 • TMS • 05.05.03
To be fitted
by qualified
professional only
+44 (0) 18 95 / 83 87 82
+44 (0) 18 95 / 83 87 91
+44 (0) 18 95 / 83 87 89
English - 6
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
Service
...................................
Fax
....................................................
Australia
Robert Bosch Australia Ltd.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
3168 Clayton/Victoria
...............................................
Fax
...............................................
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
.....................................................
Fax
.....................................................

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following
standards or standardization
EN 50 144 according to the provisions of the di-
rectives 89/336/EEC, 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
+353 (0)1 / 414 9400
+353 (0)1 / 459 8030
+61 (0)1 / 800 804 777
+61 (0)1 / 800 819 520
+64 (0)9 / 47 86 158
+64 (0)9 / 47 82 914
documents:
Dr. Eckerhard Strötgen
Head of Product
Certification