32
Note:
CHECK THAT THE STEAM GENERATOR IS
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING SERVICING.
Hazardous voltage! There may
be several power supply circuits
Repair and maintenance of the device may only be performed
by a qualified professional
Opening the column
2.
Figure 14:
1.
Slacken the lock screw and carefully pull out the thermostat
dial to disconnect the mixer panel.
2.
Slacken the screws for the steam outlet.
3.
Remove the cover washer.
Service
Figure 15:
1.
2.
1.
3.
Figure 16:
1.
2.
Remove both cover washers
Remove both black plastic sleeves
To open the front panel, pull carefully at the top of the
column. Note: Mind the glass when putting the front panel
down. Put cardboard on the floor if necessary.
1.