Carson Reflex Wheel LCD Mode D'emploi page 21

Transmitter Adjustment
A. Throttle trigger
Brake/
Speed down
Forward/
Speed up Neutral
Throttle trim (TH)
Fail Safe Function Setting
1. Set the TH, ST switches to the normal position.
2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the receiver
should start flashing rapidly.
Binding the Transmitter and Receiver
1. Turn on the receiver power.
Press the SW switch. The
receiver's LED should start
flashing.
ATTENTION
Keep the transmitter and receiver 40 cm apart when operating.
1. Push the trigger forward to
slow down or brake.
2. Pull the trigger backward to
accelerate.
Steering trim (ST)
2. Turn on the
transmitter.
CARSON Reflex Wheel LCD 2.4 GHz 50 050 0031
B. Steering wheel
Neutral
Left
Throttle Trim:
Trim the throttle servo slightly when the trigger is at
the neutral position.
Steering Trim:
If the front wheels do not align straight, use the
steering trim to adjust.
Low battery alarm
Do not operate the radio system when
the battery power is low.
4. Put the throttle trigger at the brake position,
press the F/S SET button, the LED should become
solid.
5. For electric model, put the throttle trigger at the
stop position when you are making the setting.
3. When the LED on the
receiver becomes solid,
the binding process is
completed.
GB
Right
21