Publicité
Les langues disponibles
Les langues disponibles
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual
and/or on the unit:
Product safety:
Warning:
Warning/Caution
Bans:
Commands:
Read instruction manual
before use
Environment Protection:
Wastes to be disposed of in a
professional manner not to
harm the environment.
Faulty and/or disposed of
electrical/electronic
appliances to be collected by
authorized salvage places.
Packaging
Keep away from moisture
Fragile
Technical Data:
air requirement
Max. allowable pressure
Product compliance with
respective EU standards
Warning against dangerous
voltage
General ban (combined with
another pictograph
Wear ear protectors. Wear
goggles
Cardboard packaging to be
collected for recycling.
The package should be held
upwards
working pressure
Weight
Warranty
A warranty period of 12 months applies to commercial use
and 24 months apply to private use and commences on the
day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with indication
of date of sale must be presented in case of claiming for the
warranty rights.
Warranty does not cover unprofessional use such as device
overload, violent use, damage caused by third party or foreign
materials, failure to comply with operations and assembly
manual, and normal wear and tear.
General Safety Regulations
To be able to operate the unit in a safe manner, you should
observe any instructions and information on safety, assembly
and operation contained herein. Any persons operating and
maintaining the unit should be familiarized with any possible
risks. Keep children, the sick and infirm persons away from
the unit. Supervise the children very carefully if they stay near
the unit. Also, observe any accident prevention regulation
effective in your region. The same applies to provisions on
health protection in working area.
The manufacturer shall not be held liable for any
unauthorized changes made on your machine that caused
damage.
Warning! You should always observe the general safety
precautions when using the machine and mechanical tools.
Kindly abide by any notices and orders contained in the
supplementary safety instructions and elsewhere.
TO ENABLE US TO GUARANTEE A HIGH DEGREE OF
SAFETY, FOLLOW THE INSTRUCTIONS BELOW
CAREFULLY:
CAUTION!
Compressed air tools work at various working pressure. The
recommended working pressure for majority of machines is 6
bar. Any higher pressure reduces the service life of your unit
due to a higher load.
1.
Do not let any authorised persons approach the
machine. Visitors and persons standing by, primarily
children and the sick and infirm persons should not be
permitted to access to the site. Prevent any other
persons from contact with the unit.
2.
Take a proper care of storing the unit. Any tools out of
use should be kept at a dry elevated place – or locked
as appropriate – to prevent unauthorised access.
3.
Use only proper tools for any job. For example, never
use small tools or accessories to do a job that requires
heavy tools. Use any tool for the purpose it was
designed for.
Mind proper clothing. Work clothing should fit the
4.
purpose and should not tie you up.
5.
Use ear protection. Wear personal hearing protection
equipment, such as ear protectors.
6.
Moving the unit. Secure the cabinet against rollover,
damage and the steel material coming out.
7.
Be on alert at any time. Watch out what you are doing.
Use common sense. Do not work with the cabinet when
you feel tired. You should not work with it when under
the effect of drugs, alcohol or medicaments that may
affect your responses.
8.
Have an eye for damaged parts. Before getting down
to work, check the unit for damaged parts. Even if the
damage is minor, be serious about it and consider it to
see whether the unit is able safely and perfectly. Make
sure that the moving parts are aligned and adjusted as
appropriate. Do the parts fit correctly? Are they
damaged? Is everything installed correctly? Do the
pressure conditions enable a correct function of the unit?
11
Publicité
