Publicité
Les langues disponibles
Les langues disponibles
preparations that release a lot
of steam.
• Check that your appliance is
working correctly and do not
allow too much ice to
accumulate in the freezer
(defrost when the ice is more
than 5-6 mm thick). Clean the
condenser on a regular basis
(see chapter "Routine
maintenance of your
appliance").
• Regularly check the door
seals and make sure that the
doors can be closed properly.
If this is not the case, contact
after-sales service.
• Do not adjust the
temperature too low.
• Failure to install the draws,
bins and shelves properly can
result in increased power
consumption.
Warning
If your transported the
appliance horizontally,
position it vertically and wait
for 2 hours before connecting
it. A little oil may flow into the
cooling circuit. Allow enough
time for the oil to return to the
motor before connecting the
appliance, failing which, it
could be
Always unplug your appliance
before any maintenance work.
Never pull on the power cord,
but only on the plug itself.
CLEANING AND
MAINTENANCE
Always switch off the
appliance before any
maintenance operations.
Never clean the appliance
with metal objects, steam
systems, volatile oils, organic
solvents or abrasive
components.
Do not use sharp or
cutting objects to remove the
ice. Use a plastic sponge.
Refer to the "Maintenance"
chapter in this manual to
replace the light bulb.
Publicité
