Lotus CW-94ET Instructions Pour L'installation Et L'emploi page 19

GB IE
EQUIPOTENTIAL
The appliance must be connected to an equipotential system. The connection screw is positioned at the back of the
appliance and is identified by the symbol.
Attention! The manufacturer will neither be held responsible for, nor will give any compensation during the guarantee
period for any damage caused, and which is due to inadequate installations not compliant with the instructions.
STARTING UP
Before using the appliance for the first cooking, it is necessary to clean it carefully, especially the grill (see paragraph
"cleaning and care").
Check the connection of the appliance and start it up following the instructions.
INSTRUCTIONS FOR USE
Attention: Use the appliance only under surveillance.
- The drip pan may only be opened when the appliance is cold.
The grill scan be used to cook meat, würstel, sausages, fish, vegetables, etc.
TURNING ON
Check that the drip pan is inserted. Switch on the switch above the appliance. With model CW-98ET, it is possible to
use one half of the grill or to make the two halves work at different temperatures.
Turn the knob from "O" into the desired position between 50°C and 300°; The white and green lights come on.
The green light indicates the presence of electrical tension. The white light shows that the heating element is working;
when the temperature is reached, it goes out.
To turn off the appliance, turn the knob into position "O".
CLEANING AND MAINTENANCE
Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry
cloth. Do not use abrasive or corrosive detergents. All residues of food must be removed from the grill with the proper
spatula.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING TO BE USED FOR
SOME TIME
Clean and dry the appliance carefully according to the instructions. Disconnect the power supply.
PROCEDURE TO FOLLOW IN THE EVENT OF A BREAKDOWN
In the event of breakdown, turn off the appliance, disconnect the power supply by using the device situated above the
appliance and notify the after sales service.
MAINTENANCE (ONLY FOR QUALIFIED PERSONNEL)
Any kind of maintenance must only be done by qualified personnel. Before carrying out maintenance, remove the plug
or switch off the switch above the appliance.
ACCESSIBILITY
To get to the junction box, remove the back of the appliance. The control elements are reached from the front control
panel; unscrew the black cap of the water outlet lever, unscrew the fixing screws from the control panel and remove it
19