Publicité
Les langues disponibles
Les langues disponibles
Arm, Height adjustable (1F)
5
To relieve the strain on shoulders and neck, the arms can be adjusted in
height. Adapt the height so that you do not feel any tension in the shoul-
der area.
Adjustment of Arm in Height
Pull the operating
element upward. At the same time, adjust the arms
5
at the desired height and then release the cord-pull switch.
(Arms allow adjustment to the width by using the elongated guide with position holes at the beam
holding the arms up. Loosen the screws at the bottom of the seat cushion. Adjust the width by
pulling the arms outward or inward and then tighten the screws firmly.)
5
english | 24
Multifunctional Armrest (4F)
The arm rests may be adjusted in height, in order to relief the shoulder and
neck musculature. Please adjust the height that way, so that you don't feel
any tightness in the shoulder. Additionally you may align the supports of the
arm rests in width and profundity in accordance with the particular propor-
tions of the upper part of the body, and rotate them in respect to the posi-
tion of the forearm.
To adjust the height of the armrest
Please, pull upwards the key
, and simultaneously adjust the supports at
6a
the desired height and subsequently loosen the key.
To adjust the width and profundity, or rotate the support of the armrest
You may push by a noticeable locking resistance the supports of the armrest
to the left/right or ahead/rear. By a previous pushing of the operation
6b
key
below the support, may be adjusted the rotation of the support.
6c
(The armrests may be adjusted in width by a long hole guiding in the bearing. Loosen the screwson
the lower part of the seat upholstery, establish the width by pulling or pushing the armrest outwards
or inwardly and subsequently tighten the screws again.)
6b
6c
6a
english | 25
6
Publicité
