Publicité
Les langues disponibles
Les langues disponibles
Device for Pelvis Balance
3
The device for pelvis balance allows you a harmonic adjustment of the seat
surface to different positions. This motivates you to sit actively with an open
angle, thereby promoting the stabilization of your back muscles.
Device for Pelvis Balance with Permanent-Contact Mechanism
Seat and back
automatically follow your movements. Simply shift your
3
weight to the front or to the back and the seat surface tilts correspondingly.
Further operation is not necessary.
3
3
english | 22
Adjustment of Seat Depth
The adjustment of the seat depth helps you to adjust the seat surface to the
length of your upper leg. Make sure that the front edge of the seat is at a
distance of six inches from the hollow part of the knee.
Individually Adjusted Seat Surface
While sitting, pull the operating element
shift the seat forward and backward by pushing the seat cushion. Then re-
lease the operating element.
Version without Operating Handle:
With the help of the integrated quick-release lever at the bottom side of
the seat cushion (in the front at the right side of the seat support), the seat
depth can be changed by about 2,5 cm. Lift the quick-release lever, change
the position of the seat cushion, and press the quick-release lever tightly
on again. (Note: If the seat cushion cannot be moved, turn the loosened
quick-release lever counterclockwise . If the seat cushion is not fixed tightly
after its change of position, turn the loosened quick-release lever clockwise.)
4
upward and simultaneously
4
english | 23
4
Publicité
