Viscount UNICO CL 6 Guide De L'utilisateur page 64

Viscount
UNICO
If the SAVE field is selected, the system prompts the user to assign a name to the MIDI sequence about to
be saved:
When composing the name, use the [FIELD ] and [FIELD ] buttons to move the cursor and [VALUE +]
and [VALUE -] to select the character. The first three characters can only be numbers, since they are required
for future expansions of the instrument.
To confirm the name and proceed to save the data, press the [ENTER] button; use [EXIT] to return to the
previous screen, aborting the saving operation.
The following message confirms that the file has been saved:
If [EXIT] is pressed from the save screen (i.e. when the recording has been acquired but not saved), the
system warns that the recording is about to be lost:
and that [ENTER] must be pressed to confirm that you wish to quit and delete the data acquired, or [EXIT]
to return to the save screen.
NOTE
When using a computer to rename files stored on the USB pen, remember that names can only
contain numbers and letters, which must all be lowercase.
6 4
/ /
- -
2
/
62
User Guide