Publicité
Les langues disponibles
Les langues disponibles
User Guide
ascending order.
10. Organ general controls.
These controls do not refer to individual sections but to the entire instrument.
-
[MEM. BANK +] and [MEM BANK -]: they select the memory bank displayed by the additional
[MEM. BANK] display (point 4).
-
[ENC]: enables the Enclosed function, which allows the organ's general volume to be controlled
using the swell pedal [MAN.II].
-
[A.P.]: enables the Automatic Pedal which allows the pedal voices to be played on Man.I.In this case,
the organ's pedal board is deactivated and the voices become monophonic, with priority to the lowest
note.
-
[T]: piston and foot piston for recalling the Tutti. The Tutti can be modified; the procedure for saving
it is described in point 8.
-
[C]: Cancel piston
NOTE
Memory bank n. 1 is always selected when the instrument is switched on.
11. Cover lock.
12. Switch which enables the power supply on the [EXT. +12V DC] socket.
This socket is located in the back panel (see point 17).
13. Front connections panel.
This panel, on the left underneath the manuals, contains the connectors and settings most often used, for
convenient access.
-
[MASTER VOLUME]: regulates the organ's general volume.
-
[REVERB VOLUME]: regulates the level of the reverb effect.
-
MIDI [IN]: the MIDI input connector for allowing the organ to receive the data transmitted by a
remote MIDI unit.
-
MIDI [OUT]: the MIDI connector that transmits the MIDI data generated by the organ.
-
MIDI [THRU]: retransmits the data received by the [IN] port for connection of several MIDI devices
in series.
-
[USB]: two USB connectors. The one on the left is used for connecting to a computer to allow the
instrument's setup programme to be used. The one on the right is for use of an USB stick (not
supplied with the instrument) for use as a mass memory for the organ instead of the internal memory.
For further information refer to chap. 11.
-
[PHONES]: the socket for connecting a headphone set.
14. Coupler toe-studs.
These pistons duplicate the functions of the piston, draw-stop or rocker couplers.
15. [CRESCENDO] sweller.
You can use this sweller to select the Crescendo steps which activate a preset series of stops. The step
currently selected is displayed by the additional [CRESCENDO] display (see point 4).
Each Crescendo step is programmable. The procedure for saving them is described in point 8.
16. Swell expression pedals.
The models CL / CLV 4 and CL / CLV 2 feature two expression pedals, one used to control the
volume of the Manual I and Pedalbord, the other to control the Manual II.
Viscount
UNICO
43
6
4
/
/
-
-
2
/
Publicité
Chapitres
