Publicité
Les langues disponibles
Les langues disponibles
Viscount
UNICO
1. PEDAL Section.
Contains the pedal's stops and couplers for linking the manuals to the pedal board.
2. MAN.I Section.
Contains the stops, manual couplers and tremulant of Manual I.
3. MAN.II Section.
Manual II stops and tremulant.
On each section the organ provides the [MIDI] Tab switch which enables the transmission of Note
MIDI Codes to the [MIDI OUT] port and it is possible to play one or two orchestra voices (not in the
CL / CLV 2) as well. To do so the desired sound has to be enabled through the "Alternative voice"
function (see par. 8.3). The list of the stops that can play orchestra voices changes according to the
"tonal layout" implemented in the organ. A web page were you can get info about your specific model
is at your disposal at www.physisorgans.com/download.asp.
4. Additional displays.
-
[CRESCENDO] (CL / CLV 6 only) shows the step currently reached by the [CRESCENDO] pedal
(point 15)
-
[M. BANK] displays the memory bank of the combinations (general and customised) selected using
the [MEM. BANK +] and [MEM. BANK -] pistons (point 10).
5. Lighting button.
On-off button for the music stand and manuals lights.
6. Instrument on/off switch.
7. Control and programming section.
Contains the buttons and display for viewing and programming all the instrument's setup and sequencer
functions.
8. [S] Piston.
Fixing piston for saving the general and dedicated combinations, the Tutti and the Crescendo steps.
To set a combination or the Tutti, after setting the voices as required, press [S], hold it down and then
press the piston of the combinations you wish to save.
To save a Crescendo step, select it using the pedal of the same name, press [S], hold it down and press the
[HR] of the general memories. To copy the contents of one step into another, select the step you wish to
copy, hold down the [S] piston, select the step into which you wish to copy the contents, then press the
[HR] of the general memories.
NOTE
If the LED of the [S] piston is off, programming of the organ is locked out by the Lock Organ function
(chapt. 10), so it will not be possible to save combinations and/or view internal programming functions.
9. General pistons.
These pistons recall the general combinations of the memory bank selected using [MEM. BANK +] and
[MEM. BANK -] (point 10). These combinations can be modified; the procedure for saving them is
described in point 8.
[HR] restores the voice setup prepared in manual mode before a memory was recalled.
General combination sequencer controls are also provided, [PREV] in descending order, [NEXT.] in
6
4
/
/
-
-
2
/
42
User Guide
Publicité
Chapitres
