VINCENT CD-S6 Manuel D'utilisation page 34

CONNECTING HEADPHONES
A set of headphones equipped with a 6.3 mm jack can be plugged into the "PHONES" socket (13) on the front
of the appliance.
All headphones with an impedance of between 32 Ohm and 600 Ohm may be used. Unsuitable headphones with
too low impedance may damage the amplifier or produce such unexpectedly loud volume that your hearing may
be damaged. The volume should be reduced (14) for safety reasons before a set of phones is connected.
CONNECTION OF THE POWER CABLE
Check that the electricity supply to your home is appropriate to the device. The required voltage and frequen-
cy can be read on the back of the device beside the socket for the mains. If the electricity supply is appropria-
te, push the inlet connector of the supplied mains cable firmly into socket for the mains on the back of the devi-
ce. Connect the other end of the mains cable to a mains socket.
Vincent
34