VINCENT CD-S6 Manuel D'utilisation page 27

4 5 6
1. Disc tray
This drawer can be opened or closed to insert
CD's with the button "
2. Display window for the tube
The visible vacuum tube is a part of the electrical
circuitry. You can adjust the brightness of the
window's illumination with the switch "LAMP"
(17).
3. Display with music calendar
The display shows track number, elapsed playing
time and other information.
4. POWER
This is the main power switch for turning on and
off the device. When switched off, the device is
disconnected from the mains. The CD-S6 has no
standby option.
5. SR: Infrared receiver diode
(Sensor Remote)
This diode receives the remote control commands.
It does not serve as a display element.
6. WARM UP indicator LED
This LED is illuminated while after switching on the
tubes are being warmed up.
FRONT VIEW
1
7 8 9
OPEN/CLOSE" (9)(30).
2 3
10 11
7. STOP
Stops the current playback of a CD or switches
from pause to the player's initial state.
8. PLAY/PAUSE
Button for starting, interrupting and resuming the
playback of the CD.
9. OPEN/CLOSE
Button for opening and closing the CD tray.
10. BACK
Button for going back one track.
11. NEXT
Button for going forward one track.
12. HDCD indicator LED
This LED is illuminated while an HDCD is being
played.
13. PHONES: headphone socket
You can use this 6.3mm jack socket to plug in a
headphone with an impedance of at least 32Ω.
14. LEVEL: volume knob
Use this knob to change the volume of the atta-
ched headphone.
12 13 14
Vincent
27