VINCENT CD-S6 Manuel D'utilisation page 28

15
15. AUDIO OUTPUT:
analogue audio signal output
These RCA sockets are connected to the relevant
input of the amplifier, preamplifier etc. It is not
necessary to also connect the digital signal output
(16).
16. DIGITAL OUT COAXIAL
If the amplifier, receiver or preamplifier is equip-
ped with a digital coaxial digital input connector,
the relevant CD player signal output may be con-
nected to this. It is not necessary to connect an
analogue (15) and a digital signal output (16) at
the same time.
Vincent
28
REAR VIEW
17
16
17. LAMP: Dimmer for the tube illumination
The setting of this switch affects the brightness of
the illumination of the tube display window (2).
18. FUSE: Fuse holder
This small plastic housing holds the fuse. Refer to
the security precautions.
19. AC: Power Connector
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet.
18
19