Blade's Height Adjust Handwheel; Blade's Angle Adjust Handwheel; Goniometer - Femi TS 36-523 8.45.00.25 Manuel D'instructions

EN

BLADE'S HEIGHT ADJUST HANDWHEEL

You can use this handwheeol to raise and lower the blade
(2-3). Loosen the knob and turn the handwheel clockwise to
lower the blade and anti-clockwise to raise it.

BLADE'S ANGLE ADJUST HANDWHEEL

You can use this handwheel to angle the blade (1). Turn it clockwise to angle the blade to the left. Turn it anti-
clockwise to bring back the blade at 90°. Be sure to have loosened the knob located at the level of blade s
'
height adjust knob before angling the blade and be sure to have blocked it when you have chosen the position.

GONIOMETER

The goniometer supplied with the machine can be blocked
on the carriage at the desired angle by using the handle
(D).
By tightening the handle (D) clockwise, the fence blocks
on the rail in the desired position.
The two knurled knobs (E) allows you to make the
aluminum fence slide.
41