Bosch GKS Professional 65 Notice Originale page 16

OBJ_BUCH-359-004.book Page 16 Friday, April 12, 2013 10:04 AM
16 | English
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Lock-off button for On/Off switch
3 Thumbwheel for speed preselection (GKS 65 GCE)
4 Auxiliary handle (insulated gripping surface)
5 Spindle lock button
6 Scale for mitre angle
7 Wing bolt for parallel guide
8 Clamping lever for bevel-angle preselection
9 Cutting mark, 0°
10 Cutting mark, 45°
11 Parallel guide*
12 Retracting blade guard
13 Base plate
14 Lever for retracting blade guard
15 Sawdust ejector
16 Blade guard
17 Handle (insulated gripping surface)
18 Allen key
19 Clamping bolt with washer
20 Clamping flange
21 Saw blade*
22 Mounting flange
23 Saw spindle
24 Fastening screw for extraction adapter*
25 Extraction adapter*
26 Clamping lever for cutting-depth preselection
27 Cutting-depth scale
28 Wing bolt for bevel-angle preselection
29 Set of screw clamps*
30 Guide rail*
31 Connection piece*
32 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Circular Saw
Article number
Rated power input
No-load speed
Rotational speed under load, max.
1 609 92A 089 | (12.4.13)
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); Sound power level
103 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Cutting wood: a =3.0 m/s , K=1.5 m/s
h
2
Cutting metal: a =5.0 m/s , K=1.5 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Helmut Heinzelmann
Senior Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
24.01.2013
GKS 65
3 601 F67 0.. 3 601 F68 9..
W 1600
-1
min 5900
-1
min 4200
2
,
2
.
GKS 65 G GKS 65 GCE
3 601 F68 9..
1600 1800
5900 2300 – 5000
4200 1400 – 4000
Bosch Power Tools