FujiFilm Instax mini 40 Guide D'utilisation page 10

Taking Pictures
EN
Do not open the back camera cover until you have used all
images in the loaded INSTAX Mini film pack. Opening the
camera door will expose the remainder of the unused film
pack, turning it white and rendering it no longer usable.
1
Once the batteries are loaded, press the power
button to turn the camera on.
The lens barrel extends and the flash charging lamp
blinks and then lights up. (Blinking indicates that the
flash is charging.)
2
Hold the camera, look through the viewfinder
of the camera to frame your desired
composition, and press the shutter button.
* The shutter button cannot be pressed while the
flash is charging.
10
3
When the sound of the film being ejected
stops, grasp the edge of the ejected film and
take the film out.
The film counter decreases in numerical order,
counting down from "10" with each photo taken. "0"
will be displayed when the film is finished and after
the last photo has been taken.
4
When you have finished taking photos, turn off
the camera by pushing the lens barrel back in.
If the camera malfunctions, remove the batteries while
the power is on and then reinsert them to reset the
camera.