Electronic Oven Control; Control Panel - Jenn-Air JMW2430 Guide D'utilisation Et D'entretien

This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
appearances of the items shown here may not match those of your model.
The oven's controls are accessed through its control panel.
NOTE: Due to the sensitivity of the control panel, we have provided special instructions for cleaning. See "General Cleaning" section for
cleaning instructions.
A B C
O
The control panel houses the control menu and function controls.
The control pads are very sensitive, and require only a light touch
to activate.
For more information about the individual controls, see their
respective sections in this manual.
Welcome Guide
This appears on your display the first time the oven is powered
up. The Welcome Guide allows you to set up your new oven.
After every selection, a beep will sound.
1. Select your language by pressing the quickset pad next to
English or French.
2. Select the temperature units by pressing the quickset pad
next to Fahrenheit or Celsius.
3. Select the clock units by pressing the quickset pad next to
AM/PM or 24 Hour (Military Time).
4. Choose Yes or No to have the daylight saving time
automatically updated.
5. Enter current time (00:00) using the number keypad and
choose AM or PM by pressing the quickset pad next to the
desired choice. Select Next to move to next screen.

ELECTRONIC OVEN CONTROL

D
N M
A. Touch panel
B. Microwave
C. Presets
D. 30 sec
E. Display
E
K J
L
F. Number keypad
G. Cancel microwave
H. Cancel oven
I. Kitchen timer
J. Quickset pads

Control Panel

6. Enter current date (MM/DD/YYYY) using the number keypad,
and press the quickset pad next to the Next option.
7. Select a screen appearance to match your oven. Press the
quickset pad next to Dark/Blue, Light/Blue, Dark/Orange,
Bronze/White.
8. Review your settings and press the quickset pad next to Save
option. A message will show: "You have selected a new
theme. The oven will reset momentarily. Please wait...." It will
take 1 minute to restart with the new settings set.
9. See the "Setup Menu" section for more detailed information.
Display
When the oven is in use (active mode), the display shows the
time, mode, oven temperature and timer, if set. If the timer is not
set, the Set Timer Option will also be displayed.
After approximately 2 minutes of inactivity, the display will go into
standby (sleep) mode, and the backlight of the display will dim.
When the oven is in operation, the display will remain active.
During programming, the display shows menus and the
appropriate selections for the respective cooking function.
F
I
K. More
L. Start
M. Back
N. Light
O. Oven
G
H
5