Jenn-Air JMW2430 Guide D'utilisation Et D'entretien page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OVEN DOOR INTERIOR
Cleaning Method:
Self-Clean cycle:
For optimal door cleaning result, wipe away any deposits with
a damp sponge before running cycle.
CONTROL PANEL
Activate the Button Lock to avoid touch screen activation during
cleaning. See "Button Lock" section.
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning Method:
Self-Clean cycle: See "CustomClean™ Self-Cleaning with
Adjustable Levels and Auto Lock" first.
OVEN RACKS
Cleaning Method:
Self-Clean cycle:
See "CustomClean™ Self-Cleaning with Adjustable Levels
and Auto Lock" first. Remove racks, or they will discolor and
become difficult to slide. If this happens, a light coating of
vegetable oil applied to the rack guides will help them slide.
Steel-wool pad
Oven Lights
The oven lights are 120-volt, 25-watt maximum halogen bulbs.
They will come on when the oven door is opened. On double
oven models, both upper and lower lights will come on when
either door is opened. The oven lights will not work during the
Self-Cleaning cycle. When the oven door is closed, touch LIGHT
to turn light on or off.
To Replace:
Before replacing the bulb, make sure the oven is off and cool.
1. Disconnect power.
2. Remove glass light cover by grasping the front edge and
pulling away from oven.
3. Remove bulb from socket.
4. Replace bulb, using tissue or wearing cotton gloves to handle
bulb. To avoid damage or decreasing the life of the new bulb,
do not touch bulb with bare fingers.
5. Replace bulb cover by snapping back into wall.
6. Reconnect power.
24
Oven Door
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven
doors.
Failure to do so can result in back or other injury.
IMPORTANT:
To avoid oven door glass breakage:
Do not close the oven door if the racks are not fully inserted
into the oven cavity or when bakeware extends past the front
edge of an oven rack.
Do not set objects on the glass surface of the oven door.
Do not hit glass surfaces with bakeware or other objects.
Do not wipe down glass surfaces until the oven has
completely cooled.
For normal oven use, it is not suggested to remove the oven door.
However, if removal is necessary, make sure the oven is off and
cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Open oven door to the fully open position
2. Locate the oven door latches in both corners of the oven
door and rotate the latches forward to the unlocked position.
A. Oven door latch in locked
position
A
B. Oven door latch in unlocked
position
B

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jmw2427Jmw2330Jmw2327

Table des Matières