DITEC NRG100TXE Manuel Technique page 11

4. AXEL INSTALLATION
NRGCAB
EL400
EL500E
4.1 INSTALLATION
ATTENTION! firmly tighten down all fastening screws.
- Fit the DOD12-14-15 motor onto the drive shaft.
- After having determined the position of the wall bracket, drill the holes and secure the bracket in place with dowels (not supplied).
- Insert the appropriate cotter
- Secure the metal clamp
6.35 (1/4")
6.35
(1/4")
9.5
(3/8")
NRG100TXE
NRG100TRE
NRG100TXF
NRG140TXE
according to shaft cavity length.
so as to prevent the risk of the cotter coming out of the shaft.
11
EN