dji MATRICE 600 PRO Guide De Démarrage Rapide page 6

5. Preparing the Aircraft
Mounting the
Landing Gear
Mounting and Powering On Batteries
1. Make sure all six Intelligent Flight Batteries are fully charged and powered
off. Insert the batteries into the battery compartments.
2. Press the Power Button once, then press it again and hold for two seconds.
This will power on one of the six batteries, automatically triggering the others.
DO NOT manually power on more than one Intelligent Flight Battery to avoid damaging
the batteries.
If powering on one of the six batteries does not trigger the others, follow the instructions in
the DJI GO app.
You only need to power off just one battery and all the other batteries will power off
automatically.
Activating the Aircraft
When using your Matrice 600 Pro for the first time,
activate it in DJI Assistant 2 software. Connect
the Micro USB port of the Matrice 600 Pro to the
computer with a Micro USB cable and follow the
steps in DJI Assistant 2.
First-time activation requires your DJI account and internet connection.
Unfolding the Aircraft
Ensure that all the Intelligent Flight Batteries are powered off before unfolding the aircraft.
Ensure that all the arrows on the GPS-Compass Pro point toward the front of the aircraft after unfolding them.
Note the
orientation
Note the
orientation
1
2
Attach
5