Technical Specifications - Beurer medical BC 40 Mode D'emploi

9. Technical specifications

Model no. BC 40
Measurement Oscillometric, non-invasive blood pressure
method measurement on the wrist
Measurement Cuff pressure 0 – 290 mmHg,
range Systolic 50 – 250 mmHg,
Diastolic 40 –180 mmHg,
Pulse 40 – 180 beats/minute
Display accu- Systolic ± 3 mmHg, diastolic ± 3 mmHg, pulse
racy ± 5 % of the value shown
Measurement Max. permissible standard deviation accord-
inaccuracy ing to clinical testing: systolic 8 mmHg/dias-
tolic 8 mmHg
Memory 60 memory spaces
Dimensions L 76 mm x W 70 mm x H 23 mm
Weight Approximately 105 g (without batteries)
Cuff size 12.5 to 21.5 cm
Permissible + 10 °C to + 40 °C, ≤ 85 % relative humidity
operating con- (non-condensing)
ditions
Permissible - 20 °C to + 55 °C, ≤ 85 % relative humidity,
storage condi- 800-1060 hPa ambient pressure
tions
Power supply
2 x 1.5V AAA batteries
Battery life For approx. 300 measurements, depending on
levels of blood pressure and pump pressure
Accessories Instructions for use, 2 x 1.5V AAA batteries,
storage box
Classification Internal supply, continuous operation, applica-
tion part type BF, IPX0, no AP or APG
Technical information is subject to change without notifica-
tion to allow for updates.
• This device is in line with European Standard EN 60601-1-2
and is subject to particular precautions with regard to elec-
tromagnetic compatibility (EMC). Please note that portable
and mobile HF communication systems may interfere with
this unit. More details can be requested from the stated
Customer Services address or found at the end of the
instructions for use.
• This device corresponds to the EU Medical Devices Direc-
tive 93/42/EEC, the German Medical Devices Act (Mediz-
inproduktgesetz) and the standards EN 1060-1 (non-inva-
sive sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part3:
Supplementary requirements for electro-mechanical blood
pressure measuring systems) and IEC80601-2-30 (Medical
electrical equipment – Part 2 – 30: Particular requirements
for the basic safety and essential performance of auto-
mated non-invasive sphygmomanometers).
25