Panasonic AW-HE100E Mode D'emploi page 61

Specifications
White balance:
Black balance:
Chroma amount variability:
Shooting mode (SCENE FILE):
Colour bars:
Output format:
Video output:
Synchronization system:
[Pan-tilt head unit]
Installation method:
Controller connections:
Pan range:
Tilt range:
Operating speed:
Stop accuracy:
Noise level:
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
AWC A, AWC B, ATW, 3200K, 5600K
Auto
7 levels variability
Halogen, Fluorescent, Daylight, User
FULL BAR
HD: 1080: 50i, 720: 50p
SD: 576: 50i, 25psF
• Composite: 1.0 Vp-p/75  (BNC  1)
• HD/SD analogue component or SD Y/C (VGA 15P  1)
Y/Pb/Pr (HD) Y: 1.0 Vp-p/75 , Pr/Pb: 0.7 Vp-p/75  (VGA 15P  1)
Y/Pb/Pr (SD) Y: 1.0 Vp-p/75 , Pr/Pb: 0.525 Vp-p/75  (VGA 15P  1)
Y/C Y: 1.0 Vp-p/75 , C: 0.3 Vp-p/75  (burst) 576: 50i, 25psF
 In the Y/Pb/Pr mode, HD or SD can be selected.
 In the SD mode, Y/Pb/Pr or Y/C can be selected.
 In the Y/C mode, the VBS signal is output to the Y pin of the VGA 15P output
connector, the Y signal to the Pb pin and the C signal to the Pr pin.
Internal/External synchronization (BBS or VBS, BNC  1)
Stand-alone (Desktop) or suspended (Hanging)
 To ensure safety, the unit must be secured using the accessory brackets.
Be sure to ask a qualified contractor to install the unit.
Connecting cable: 10BASE-T (STP category 5) straight cable,
Max. 1000 m
(Control only: Use of an external device or some other means must be
provided separately in order to extend the video signal connections.)
Protocol: RS-422A, AW series protocol
±175°
–40° to +210°
Max. 60°/s
Less than ±3´ (0.05°)
NC30 (during operation at 30°/s),
NC35 (during operation at 60°/s)
60 (E)