Concerning The Controller - Panasonic AW-HE100E Mode D'emploi

Concerning the controller

Controller supported
 AW-RP655  AW-RP555
 AW-RP400 + AW-IF400 + AW-CB400 (System which combines the AW-RP400, AW-IF400 and AW-CB400)
 It may be necessary to upgrade the version of the controller in order to support the unit.
Consult with your dealer.
 When connecting the AW-RP655
 The camera setting menus of the AW-RP655 cannot be used.
 Use the camera setting menus of the unit instead.
 When connecting the AW-RP400 + AW-IF400 + AW-CB400
 The AW-CB400 cannot be connected directly to this unit.
 The AW-CB400 must be connected together with the AW-RP400 and AW-IF400 in combination.
 The camera setting menus of the AW-CB400 cannot be used.
 Use the camera setting menus of the unit instead.
 R/B PED dials cannot be used.
 The tracing memory function cannot be used.
 TILT RANGE cannot be set.
 MEMORY LENGTH cannot be set.
 DIAGONAL MOTION cannot be set to ON or OFF.
 Backlash cannot be compensated.
 When the ON/OFF setting of auto focus (AF) is switched from AW-RP400, use the OPTION SW after allocating the "EXT"
function to it.
8 (E)