Black Balance Adjustment - Panasonic AW-HE100E Mode D'emploi

Black balance adjustment

Black balance adjustment
In order for the black to be reproduced accurately, the zero
levels of the three primary colours (RGB) are adjusted. If the
black balance has shifted out of adjustment, not only will the
black be reproduced poorly but the colour tones of the entire
screen will also be degraded. Normally, the black balance
need not be re-adjusted, but it is necessary in the following
situations.
 This adjustment must be performed when using the
unit for the first time or when the unit has not been
used for a prolonged period.
 The adjustment must be performed when the ambient
temperature has changed significantly and at the
change of the seasons.
 Automatic adjustment
When performing the operations using the
accessory wireless remote control
The procedure is the same as with "Automatic adjustment"
in "White balance adjustment" (page 30).
The auto white balance adjustment (AWC) and auto black
balance adjustment (ABC) can be performed, and the black
balance setting entered.
 The white balance setting is also entered at the same
time so ensure that the conditions for adjusting the white
balance are met before proceeding.
 The black balance cannot be adjusted when colour bars
are displayed. Press the [MODE] button to switch to the
camera picture.
When doing the adjustment
using the controller
1
Press the [ABC] button.
The auto black balance operation is executed, and the
black balance setting is entered.
The [ABC] button's lamp or LED blinks while the black
balance is being adjusted, and its lamp goes off when
the adjustment is completed successfully. It lights if the
black balance could not be adjusted.
 If colour bars have been selected (the [MODE] button
or [BAR/CAM] button lights), it means that the [ABC]
button is not working or that the auto black balance
adjustment has failed. (The button's lamp lights.)
33 (E)